Advertisements

Linux Fibre HBA in status Linkdown

root@linux:~ # systool -c fc_host -v
Class = “fc_host”

Class Device = “host1”
Class Device path = “/sys/class/fc_host/host1”
fabric_name = “0x100000051e36219e”
issue_lip =
node_name = “0x50060b0000c29e39”
port_id = “0x1ebe01”
port_name = “0x50060b0000c29e38”
port_state = “Online”
port_type = “NPort (fabric via point-to-point)”
speed = “4 Gbit”
supported_classes = “Class 3”
supported_speeds = “1 Gbit, 2 Gbit, 4 Gbit”
symbolic_name = “QMH2462 FW:v5.06.03 DVR:v8.03.07.15.05.09-k”
system_hostname = “”
tgtid_bind_type = “wwpn (World Wide Port Name)”
uevent =

Device = “host1”
Device path = “/sys/devices/pci0000:00/0000:00:09.0/0000:09:00.0/host1”
fw_dump =
nvram = “ISP ”
optrom_ctl =
optrom =
reset =
uevent =
vpd = “▒8”

Class Device = “host2”
Class Device path = “/sys/class/fc_host/host2”
fabric_name = “0x50060b0000c29e3b”
issue_lip =
node_name = “0x50060b0000c29e3b”
port_id = “0x000000”
port_name = “0x50060b0000c29e3a”
port_state = “Linkdown
port_type = “Unknown
speed = “unknown
supported_classes = “Class 3”
supported_speeds = “1 Gbit, 2 Gbit, 4 Gbit”
symbolic_name = “QMH2462 FW:v5.06.03 DVR:v8.03.07.15.05.09-k”
system_hostname = “”
tgtid_bind_type = “wwpn (World Wide Port Name)”
uevent =

Device = “host2”
Device path = “/sys/devices/pci0000:00/0000:00:09.0/0000:09:00.1/host2”
fw_dump =
nvram = “ISP ”
optrom_ctl =
optrom =
reset =
uevent =
vpd = “▒8”

Perform diagnostic steps below to isolate initialization issue. Engaged hardware vendor to check the card

Advertisements
%d bloggers like this: