Advertisements

Connecting to XSCF and accessing console

Sun SPARC Enterprise M-class server has a new service processor.

XSCF> man intro

Intro Intro(1)

NAME
Intro – list the commands provided by the XSCF firmware

DESCRIPTION
This Intro page lists the user commands (exit(1), man(1),
and who(1)) and system administration commands (all the oth-
ers, beginning with addboard(8)) provided by the XSCF
firmware of the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 servers. Some XSCF commands
have the same name as their Oracle Solaris OS counterpart,
but function slightly differently. For details, refer to the
man page for each command.

The following commands are supported:

exit exit the XSCF shell

man display manual pages of specified
XSCF shell command

who display a list of the user accounts
who are logged in to the XSCF

addboard configure an eXtended System
Board(XSB) into the domain confi-
guration or assigns it to the domain
configuration

addcodactivation add a Capacity on Demand (COD)
hardware activation key (COD key) to
the COD database

addcodlicense add a Capacity on Demand (COD)
right-to-use (RTU) license key to
the COD license database

addfru add a Field Replaceable Unit (FRU)

XCP Last change: April 2013 1

Intro Intro(1)

adduser create an XSCF user account

applynetwork apply XSCF network information to
the XSCF

cfgdevice connect a CD-RW/DVD-RW and TAPE
drive unit to the port, disconnect
it from the port, or display the
status of the drive

clockboard set or display the clock control
unit used at system startup

console connect to a domain console

deleteboard disconnect an eXtended System Board
(XSB) from the domain configuration

deletecodactivation remove a Capacity on Demand (COD)
hardware activation key (COD key)
from the COD database

deletecodlicense remove a Capacity on Demand (COD)
right-to-use (RTU) license key from
the COD license database

deletefru delete a Field Replaceable Unit
(FRU)

deleteuser delete an XSCF user account

XCP Last change: April 2013 2

Intro Intro(1)

disableuser disable an XSCF user account

dumpconfig save system configuration informa-
tion to a file

enableuser enable an XSCF user account

flashupdate update the firmware

fmadm fault management configuration tool

fmdump view fault management logs

fmstat report fault management module
statistics

forcerebootxscf reset the XSCF forcibly

getflashimage download a firmware image file

ioxadm manage External I/O Expansion Units
and add-in cards that contain Energy
Storage Modules and are attached to
the host system

moveboard move an eXtended System Board (XSB)
from the current domain to another

nslookup refer to the DNS server for the host

XCP Last change: April 2013 3

Intro Intro(1)

password manage user passwords and expiration
settings

ping send the ICMP ECHO_REQUEST packets
to the network host or the network
device

poweroff turn off the power to the specified
domain

poweron turn on the power to the specified
domain

prtfru display FRUID data on the system and
External I/O Expansion Unit

rebootxscf reset the XSCF

replacefru replace a Field Replaceable Unit
(FRU)

reset reset the specified domain

resetdateoffset reset time of domains to match sys-
tem time

restoreconfig restore the system configuration
information previously saved by
dumpconfig

restoredefaults restore factory settings of the
server or XSCF unit

XCP Last change: April 2013 4

Intro Intro(1)

sendbreak send a break signal to the specified
domain

setad configure Active Directory

setaltitude set the altitude of the system or
whether or not the air filter
installed

setarchiving configure the log archiving func-
tionality

setaudit manage the system auditing func-
tionality

setautologout set the session timeout time of the
XSCF shell

setcod set up the Capacity on Demand (COD)
resources used for domains

setdate set the date and time of XSCF

setdcl set a domain component list (DCL)

setdomainmode set a domain mode

setdomparam forcibly rewrite OpenBoot PROM
environment variables

XCP Last change: April 2013 5

Intro Intro(1)

setdscp set the IP address assignments for
the Domain to Service Processor Com-
munications Protocol (DSCP)

setdualpowerfeed set dual power feed mode

setemailreport set up the email report configura-
tion data

sethostname set a host name and domain name for
an XSCF unit

sethttps start or stop the HTTPS service,
which is used in the XSCF network.
This command also performs
authentication-related settings

setldap configure the Service Processor as a
Lightweight Directory Access Proto-
col (LDAP) client

setldapssl configure LDAP/SSL

setlocale set the default locale of the XSCF

setlocator control the blinking of the CHECK
LED on the operator panel

setloginlockout enable or disable login lockout
feature

XCP Last change: April 2013 6

Intro Intro(1)

setlookup enable or disable the use of the
Lightweight Directory Access Proto-
col (LDAP) server for authentication
and privilege lookup

setnameserver set the domain name system (DNS)
servers and the DNS search paths
used in the XSCF network

setnetwork set or remove the network interface
that used in XSCF

setntp set the NTP servers used on the XSCF
network, the stratum value, the pre-
ferred server and the clock address
of the local clock of XSCF

setpacketfilters set the IP packet filtering rules to
be used in the XSCF network

setpasswordpolicy manage the system password policy

setpowerupdelay set the warm-up time of the system
and wait time before system startup

setprivileges assign user privileges

setroute set routing information for an XSCF
network interface

setshutdowndelay set the shutdown wait time at power
interruption of the uninterruptible
power supply (UPS)

XCP Last change: April 2013 7

Intro Intro(1)

setsmtp set up the Simple Mail Transfer Pro-
tocol (SMTP) settings

setsnmp manage the SNMP agent

setsnmpusm specify the SNMPv3 agent’s User-
based Security Model (USM) confi-
guration

setsnmpvacm modify the SNMPv3 agent’s View-based
Access Control Model (VACM) confi-
guration

setssh configure the settings for the
Secure Shell (SSH) service used in
the XSCF network

setsunmc start or stop the Sun Management
Center agent and make changes to its
configuration

settelnet start or stop the telnet service
used in the XSCF network

settimezone set the time zone and Daylight Sav-
ing Time of XSCF

setupfru set up device hardware

setupplatform set up platform specific settings

XCP Last change: April 2013 8

Intro Intro(1)

showad show Active Directory configuration
and messages

showaltitude display the altitude of the system
and whether the air filter installed

showarchiving display log archiving configuration
and status

showaudit display the current auditing system
state

showautologout display the session timeout time of
the XSCF shell

showboards display information on an eXtended
System Board (XSB)

showcod display Capacity on Demand (COD)
information

showcodactivation display the current Capacity on
Demand (COD) hardware activation
permits (COD permits) stored in the
COD database

showcodactivationhistoryshow Capacity on Demand (COD)
activation log

showcodlicense display the current Capacity on
Demand (COD) right-to-use (RTU)
licenses stored in the COD license
database

XCP Last change: April 2013 9

Intro Intro(1)

showcodusage display the current usage statistics
for Capacity on Demand (COD)
resources

showconsolepath display information on the domain
console that is currently connected

showdate show the date and time of XSCF

showdateoffset display differences between system
time and domain times

showdcl display the current domain component
list (DCL)

showdevices display current information on an
eXtended System Board (XSB)

showdomainmode display the domain mode

showdomainstatus display the current domain component
list (DCL)

showdscp display the IP addresses assigned to
the Domain to Service Processor Com-
munications Protocol (DSCP)

showdualpowerfeed display the current setting of dual
power feed mode

showemailreport display the email report configura-
tion data

XCP Last change: April 2013 10

Intro Intro(1)

showenvironment display the air flow volume, intake
air temperature and humidity, tem-
perature sensor, voltage sensor, fan
speed, and power consumption infor-
mation in the server

showfru display the hardware settings of
specified device

showhardconf display information about Field
Replaceable Units (FRUs) installed
in the system

showhostname display the current host name for
the XSCF unit

showhttps display the status of the HTTPS ser-
vice set for the XSCF network

showldap display the Lightweight Directory
Access Protocol (LDAP) configuration
for the Service Processor

showldapssl show LDAP/SSL configuration and mes-
sages

showlocale display the current setting for the
XSCF locale

showlocator display the state of the CHECK LED
on the operator panel

showloginlockout display the account lockout setting

XCP Last change: April 2013 11

Intro Intro(1)

showlogs display the specified log

showlookup display the configuration for
authentication and privileges lookup

showmonitorlog display the contents of monitoring
messages in real time

shownameserver display the registered domain name
system (DNS) servers and the DNS
search paths specified on the XSCF
network

shownetwork display information of network
interfaces for XSCF

shownotice display copyright and license infor-
mation for the copyright information
for eXtended System Control Facility
(XSCF) Control Package (XCP)

showntp display the NTP servers currently
set for the XSCF network

showpacketfilters show the IP packet filtering rules
that are set in the XSCF network

showpasswordpolicy display the current password set-
tings

showpowerupdelay display the current settings for the
warm-up time of the system and wait
time before system startup

XCP Last change: April 2013 12

Intro Intro(1)

showresult display the exit status of the most
recently executed command

showroute display routing information for an
XSCF network interface

showshutdowndelay show the shutdown wait time at power
interruption of the uninterruptible
power supply (UPS)

showsmtp display the Simple Mail Transfer
Protocol (SMTP) configuration infor-
mation

showsnmp display the configuration informa-
tion and current status of the SNMP
agent

showsnmpusm display the current User-based Secu-
rity Model (USM) information for the
SNMP agent

showsnmpvacm display the current View-based
Access Control Access (VACM) infor-
mation for the SNMP agent

showssh display the settings of the Secure
Shell (SSH) service that configured
for the XSCF network

showstatus display the degraded Field Replace-
able Units (FRUs)

XCP Last change: April 2013 13

Intro Intro(1)

showsunmc show setup information and status of
Sun Management Center agent

showtelnet display the current status of the
telnet service for the XSCF network

showtimezone display the XSCF time zone and Day-
light Saving Time information of
current settings

showuser display user account information

snapshot collect and transfer environment,
log, error, and FRUID data

switchscf switch the XSCF unit between the
active and standby states

testsb perform an initial diagnosis of the
specified physical system board
(PSB)

traceroute display the route packets take to
the specified network host or the
network device

unlockmaintenance forcibly release the locked status
of XSCF

version display firmware version

XCP Last change: April 2013 14

Intro Intro(1)

viewaudit display audit records

XCP Last change: April 2013 15

Displays the domain status for all domains

XSCF> showdomainstatus -a
DID Domain Status
00 Running
01 Running
02 Running
03 –
04 –
05 –
06 –
07 –
08 –
09 –
10 –
11 –
12 –
13 –
14 –
15 –
16 –
17 –
18 –
19 –
20 –
21 –
22 –
23 –

Connecting to domain 00. To exit, press #.

XSCF> console -d 00

Console contents may be logged.
Connect to DomainID 0?[y|n] :y

*******************************************************************************
* *
* Use of this system is restricted to authorized users. User activity is *
* monitored and recorded by system personnel. Anyone using this system *
* expressly consents to such monitoring and recording. BE ADVISED: if *
* possible criminal activity is detected, system records, along with certain *
* personal information, may be provided to law enforcement officials. *
* *
*******************************************************************************
solaris10 console login: exit from console.

Connecting to domain 01. To exit, press #.

XSCF> console -d 01

Console contents may be logged.
Connect to DomainID 1?[y|n] :y

*******************************************************************************
* *
* Use of this system is restricted to authorized users. User activity is *
* monitored and recorded by system personnel. Anyone using this system *
* expressly consents to such monitoring and recording. BE ADVISED: if *
* possible criminal activity is detected, system records, along with certain *
* personal information, may be provided to law enforcement officials. *
* *
*******************************************************************************
solaris11 console login: exit from console.

Type exit to exit XSCF

XSCF> exit
logout
Connection to 172.22.250.60 closed.

Advertisements
%d bloggers like this: